Firmware-Updates
FENRIS
ARGON AUDIO FENRIS
FENRIS A4 | 24.01.2022
Download here
FENRIS A5 | 24.01.2022
Download here
FENRIS A55 | 24.01.2022
Download here
- Removed noise gate on all inputs
- Fixed muting issue on phono input
- Greatly improved sound tuning on A5 and A55
- Improved gain on A55
- Fixed a volume bug when switching between Bluetooth and HDMI ARC
- Fixed disabling and enabling auto power up/auto power down not working properly
- USB power now also works in standby
To update the speakers, please do the following:
- Unzip the file and put the "ota.bin" file on an empty USB drive (MAX 32 GB - formatted as FAT32)*. Remember to "eject" it properly before removing it from the computer
- Plug it into the USB port on the back of the speaker
- Turn on the speaker and hold the mute-button for 8 seconds
- The LED on the speaker will now start blinking to indicate it is updating
- Once it has stopped blinking, please unplug the power cable, disconnect the USB drive and wait 5 seconds before turning on the speaker again. It's now updated!
SA1
ARGON AUDIO SA1
SA1 | 24.02.2022
Download here
This firmware update changes the way Bluetooth works on the SA1, allowing Bluetooth pairing only when the amplifier is set to the Bluetooth input, regardless of whether it is on or in standby mode.
For a smooth update procedure, please follow the steps outlined below:
Safety First: Always make sure that the amplifier is disconnected from the mains before starting the update process.
1. Connection:
- Use a USB A-A cable to connect your Windows PC to the SA1.
2. Initial Setup:
- While pressing and holding the volume knob on the SA1 amplifier's front, plug in its power cable.
- Release the volume knob once connected.
3. File Management:
- The amplifier will now be recognized as an external USB drive on your PC.
- Remove the existing .bin firmware file.
- Transfer the new .bin firmware file. (Note: Transfer only the .bin file, not folders or other files.)
4. Rebooting the Amplifier:
- Turn off the SA1 amplifier by disconnecting the power and USB cables.
- Wait for about 15 seconds, or until the blue light on the amplifier turns off, signifying the power supply has discharged.
- Reconnect the power cable.
5. Resetting:
- Turn on the amplifier and switch to the BT input.
- Press and hold the volume button for approximately 8-10 seconds. Release when one of the input selector LEDs starts flashing rapidly in blue.
6. Confirmation:
- The first blue LED will flash slowly, indicating the BT pairing mode. At this point, your update is successfully completed.
After the update, you have to pair and then unpair with your phone again. With this firmware update, it will now only be possible to pair when the amplifier is on the Bluetooth input - no matter if it's switched on or off.
ARGON AUDIO FENRIS
FENRIS A4 | 24.01.2022
Download here
FENRIS A5 | 24.01.2022
Download here
FENRIS A55 | 24.01.2022
Download here
- Removed noise gate on all inputs
- Fixed muting issue on phono input
- Greatly improved sound tuning on A5 and A55
- Improved gain on A55
- Fixed a volume bug when switching between Bluetooth and HDMI ARC
- Fixed disabling and enabling auto power up/auto power down not working properly
- USB power now also works in standby
To update the speakers, please do the following:
- Unzip the file and put the "ota.bin" file on an empty USB drive (MAX 32 GB - formatted as FAT32)*. Remember to "eject" it properly before removing it from the computer
- Plug it into the USB port on the back of the speaker
- Turn on the speaker and hold the mute-button for 8 seconds
- The LED on the speaker will now start blinking to indicate it is updating
- Once it has stopped blinking, please unplug the power cable, disconnect the USB drive and wait 5 seconds before turning on the speaker again. It's now updated!
ARGON AUDIO SA1
SA1 | 24.02.2022
Download here
This firmware update changes the way Bluetooth works on the SA1, allowing Bluetooth pairing only when the amplifier is set to the Bluetooth input, regardless of whether it is on or in standby mode.
For a smooth update procedure, please follow the steps outlined below:
Safety First: Always make sure that the amplifier is disconnected from the mains before starting the update process.
1. Connection:
- Use a USB A-A cable to connect your Windows PC to the SA1.
2. Initial Setup:
- While pressing and holding the volume knob on the SA1 amplifier's front, plug in its power cable.
- Release the volume knob once connected.
3. File Management:
- The amplifier will now be recognized as an external USB drive on your PC.
- Remove the existing .bin firmware file.
- Transfer the new .bin firmware file. (Note: Transfer only the .bin file, not folders or other files.)
4. Rebooting the Amplifier:
- Turn off the SA1 amplifier by disconnecting the power and USB cables.
- Wait for about 15 seconds, or until the blue light on the amplifier turns off, signifying the power supply has discharged.
- Reconnect the power cable.
5. Resetting:
- Turn on the amplifier and switch to the BT input.
- Press and hold the volume button for approximately 8-10 seconds. Release when one of the input selector LEDs starts flashing rapidly in blue.
6. Confirmation:
- The first blue LED will flash slowly, indicating the BT pairing mode. At this point, your update is successfully completed.
After the update, you have to pair and then unpair with your phone again. With this firmware update, it will now only be possible to pair when the amplifier is on the Bluetooth input - no matter if it's switched on or off.
Mac: How To Format Your USB Drive to FAT32
Step 1: Insert a USB drive into a USB port.
Step 2: Navigate to Applications > Utilities, and click it twice to open it.
Step 3: Select the drive you want to format and click on Erase.
Step 4: Rename the USB drive (optional), and choose the MS-DOS(FAT) for format
Step 5: Select Master Boot Record for scheme, hit Erase
Step 6: Once the process is done, you are ready to use the drive with FAT32 file system to save data
All files on the USB flash drive will be deleted during the convert process with format feature, so please back up your files first if you have data inside originally.
Windows: How To Format Your USB Drive to FAT32
Step 1: Insert a USB drive into a USB port.
Step 2A: Type and search 'This PC' in the Windows search bar, then click Open.
Step 2B: Open File Explorer. Click on 'This PC' from the left pane.
Step 3: Under the "Devices and drives" section, right-click the flash drive and select the Format option.
Step 4: Select File system to 'FAT32', then click Start.
Step 5: A notice appeared to remind that all data on the USB flash drive will be deleted. Click OK to start formatting your USB flash drive.
Step 6: The format process is completed and your USB flash drive has been converted to FAT32. Click OK to close the window.
All files on the USB flash drive will be deleted during the convert process with format feature, so please back up your files first if you have data inside originally.
If you have any further questions, please do not hesitate to contact our support team at support@argonaudio.com
Wir sind da, um zu helfen
Hast Du eine Frage zu unseren Produkten oder unserem Service? Bitte melde Dich bei uns! Wir werden Dir so schnell wie möglich antworten.
Wie sind eure Rückgabebedingungen?
Wir bieten ein 30-tägiges kostenloses Rückgaberecht. Wenn Du also aus irgendeinem Grund nicht mit dem Produkt zufrieden bist (auch wenn wir das bezweifeln), kannst Du es innerhalb von 30 Tagen zurückgeben und bekommst den vollen Kaufpreis erstattet. Wir übernehmen sogar die Kosten für den Rückversand, damit Du das Produkt risikofrei ausprobieren kannst.
Gibt es internationalen Versand?
Im Moment können wir nur in Länder innerhalb der EU liefern. Die Versandkosten werden beim Bezahlvorgang hinzugefügt.
Wie lange dauert es in der Regel, bis meine Bestellung ankommt?
Die Lieferung dauert in der Regel 1-4 Werktage, aber das hängt auch von Deinem Standort ab. Du erhältst die Lieferdetails in Deiner Bestätigungs-E-Mail. Die Versandzeit ist die geschätzte Zeit vom Verlassen unseres Lagers in Dänemark bis zum Eintreffen des Pakets am Zielort.
Wie kann ich meine Bestellung verfolgen?
Nachdem Deine Bestellung versandt wurde, schicken wir Dir eine E-Mail mit einer Sendungsverfolgungsnummer, damit Du Dein Paket auf dem Weg von einem Land zum anderen verfolgen kannst. Wir nutzen PostNord, DPD und DHL für den Versand.
Fallen zusätzliche Kosten für Versand oder Bearbeitung an?
Alle Produkte enthalten Steuern. Die Versandkosten werden beim Bezahlvorgang berechnet. Wir sind überzeugt, dass die Qualität unserer Produkte für sich selbst spricht und dass Du uns zustimmen wirst, wenn Du sie einmal gehört hast. Deshalb bieten wir kostenlosen Versand und Rückversand für Bestellungen ab 49 € an, damit Du das Produkt risikofrei ausprobieren kannst.
Wo finde ich Produkthandbücher?
Links zu unseren Produkthandbüchern und häufig gestellten Fragen findest Du unten.
HANDBÜCHER UND DOWNLOADS